micro controller Archives | Shopikbuzz https://shopikbuzz.pk/product-tag/micro-controller/ Pakistan's Largest Online Electronic Item Store Wed, 21 Jan 2026 13:04:06 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://shopikbuzz.pk/wp-content/uploads/2019/08/cropped-logo-final-32x32.png micro controller Archives | Shopikbuzz https://shopikbuzz.pk/product-tag/micro-controller/ 32 32 MAX32630FTHR Microcontroller Development Board https://shopikbuzz.pk/product/max32630fthr-microcontroller-development-board/ https://shopikbuzz.pk/product/max32630fthr-microcontroller-development-board/#respond Fri, 01 May 2020 00:25:36 +0000 https://shopikbuzz.pk/?post_type=product&p=30200 Key Features
  • MAX32630 Microcontroller
    • ARM Cortex-M4F, 96MHz
    • 2048KB Flash Memory
    • 512KB SRAM
    • 8KB Instruction Cache
    • Full-Speed USB 2.0
    • Three SPI Masters, One Slave
    • Three I2C Masters, One Slave
    • Four UARTS
    • 1-Wire Master
    • 66 GPIO
    • 4 Input 10-Bit ADC
  • MAX14690 Wearable PMIC
    • Battery Charger with Smart Selector
    • Dual Micro IQ Buck Regulators
    • Three Micro IQ Linear Regulators
    • Power-On/Off Sequencing Controller
    • Voltage Monitor Multiplexer
  • Expansion Connections
    • Breadboard-Compatible Headers
    • Micro SD Card Connector
    • Battery Connector
    • Micro USB Connector
  • Integrated Peripherals
    • RGB Indicator LED
    • 6-Axis Accelerometer/Gyro
    • Dual-Mode Bluetooth Module
    • User Pushbutton
  • mbed® HDK Debug Interface
    • Drag-and-Drop Programming
    • SWD Debugger
    • Virtual UART Console

The post MAX32630FTHR Microcontroller Development Board appeared first on Shopikbuzz.

]]> MAX32630FTHR

The MAX32630FTHR board is a rapid development platform designed to help engineers quickly implement battery optimized solutions with the MAX32630 ARM® Cortex®-M4F microcontroller. The board also includes the MAX14690 wearable PMIC to provide optimal power conversion and battery management. The form factor is a small 0.9in by 2.0in dual row header footprint that is compatible with breadboards and off-the shelf peripheral expansion boards. Additionally, on board are a variety of peripherals including a dual-mode Bluetooth® module, micro SD card connector, 6-axis accelerometer/ gyro, RGB indicator LED, and pushbutton. This provides a power-optimized flexible platform for quick proof-of-concepts and early software development to enhance time to market.

Key Features

  • MAX32630 Microcontroller
    • ARM Cortex-M4F, 96MHz
    • 2048KB Flash Memory
    • 512KB SRAM
    • 8KB Instruction Cache
    • Full-Speed USB 2.0
    • Three SPI Masters, One Slave
    • Three I2C Masters, One Slave
    • Four UARTS
    • 1-Wire Master
    • 66 GPIO
    • 4 Input 10-Bit ADC
  • MAX14690 Wearable PMIC
    • Battery Charger with Smart Selector
    • Dual Micro IQ Buck Regulators
    • Three Micro IQ Linear Regulators
    • Power-On/Off Sequencing Controller
    • Voltage Monitor Multiplexer
  • Expansion Connections
    • Breadboard-Compatible Headers
    • Micro SD Card Connector
    • Battery Connector
    • Micro USB Connector
  • Integrated Peripherals
    • RGB Indicator LED
    • 6-Axis Accelerometer/Gyro
    • Dual-Mode Bluetooth Module
    • User Pushbutton
  • mbed® HDK Debug Interface
    • Drag-and-Drop Programming
    • SWD Debugger
    • Virtual UART Console

The post MAX32630FTHR Microcontroller Development Board appeared first on Shopikbuzz.

]]> https://shopikbuzz.pk/product/max32630fthr-microcontroller-development-board/feed/ 0 Arduino Pro Micro 5V 16MHZ Development Board https://shopikbuzz.pk/product/arduino-pro-micro/ https://shopikbuzz.pk/product/arduino-pro-micro/#respond Wed, 04 Dec 2019 18:54:43 +0000 https://shopikbuzz.pk/?post_type=product&p=24015 FEATURES:
  1. ATMEGA32U4 running in 5V / 16MHz
  2. Support Arduino IDE V1.0.1
  3. Micro USB interface programming on the board
  4. Four 10-bit ADC pin
  5. 12 digital I / O (5 PWM capability)
  6. Rx and Tx hardware serial connection
Spanning 5 V
Input voltage 7 V - 12 V
Flash memory 32 KB
Digital I/O 12
PWM 5
Stroom per I/O 40 mA
Microcontroller ATmega32U4
Clock speed 16 MHz
EEPROM 1 KB
SRAM 2,5 KB
Analoog I / O 4

The post Arduino Pro Micro 5V 16MHZ Development Board appeared first on Shopikbuzz.

]]> Arduino Pro Micro

FEATURES:

  1. ATMEGA32U4 running in 5V / 16MHz
  2. Support Arduino IDE V1.0.1
  3. Micro USB interface programming on the board
  4. Four 10-bit ADC pin
  5. 12 digital I / O (5 PWM capability)
  6. Rx and Tx hardware serial connection
This tiny little board does all of the neat-o for Arduino tricks that you’re familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite for Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC.
The Arduino pro micro is actually the small version of the Arduino Leonardo, based on the ATmega32u4. Due to its size, the board contains 12 digital input / output pins (5 of which can be used as PWM outputs), 4 (10 bit) ADC inputs, a 16 MHz crystal and a micro USB connection. Connect the sign to the computer and you can start immediately.

These boards, like the Leonardo, differ from previous boards, because the ATmega32u4 contains built-in USB communication, so that only a single microprocessor is needed on the board. This allows the board to be connected directly and used as a mouse or keyboard, because the USB communication goes through the same chip, the Arduino will log on and log off as a USB system when it is programmed or reset.

This Arduino is a clone, which means that this sign was not built in the original factory. The only difference between original and clones is that these Arduinos are cheaper. All components and circuits are otherwise identical.

The post Arduino Pro Micro 5V 16MHZ Development Board appeared first on Shopikbuzz.

]]> https://shopikbuzz.pk/product/arduino-pro-micro/feed/ 0 Arduino Uno R3 SMD Micro controller https://shopikbuzz.pk/product/arduino-uno-r3-smd/ https://shopikbuzz.pk/product/arduino-uno-r3-smd/#respond Wed, 04 Dec 2019 18:51:55 +0000 https://shopikbuzz.pk/?post_type=product&p=24013 Specs:
  • Microcontroller: ATmega328P (SMD Version)
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limit): 6-20V
  • Digital I/O Pins: 14 (6 provide PWM output)
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 20 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB (ATmega328P) 0.5 KB used by bootloader
  • SRAM: 2 KB (ATmega328P)
  • EEPROM: 1 KB (ATmega328P)
  • Clock Speed: 16 MHz
  • LED_BUILTIN: Pin 13

Features:

  • ATmega328-AU microcontroller with UNO Bootloader Installed.
  • CH340G Replace ATmega16U2
  • USB Programming Facilitated by the CH340G.
  • Micro USB Connector
  • ICSP Header
  • 3 extra lines of connectors for solder pins and get adicional 3.3V, 5V, GND, SCL, SDA, RX and TX.

The post Arduino Uno R3 SMD Micro controller appeared first on Shopikbuzz.

]]> Arduino Uno:

Specs:

  • Microcontroller: ATmega328P (SMD Version)
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limit): 6-20V
  • Digital I/O Pins: 14 (6 provide PWM output)
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 20 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB (ATmega328P) 0.5 KB used by bootloader
  • SRAM: 2 KB (ATmega328P)
  • EEPROM: 1 KB (ATmega328P)
  • Clock Speed: 16 MHz
  • LED_BUILTIN: Pin 13

Features:

  • ATmega328-AU microcontroller with Arduino Uno Bootloader Installed.
  • CH340G Replace ATmega16U2
  • USB Programming Facilitated by the CH340G.
  • Micro USB Connector
  • ICSP Header
  • 3 extra lines of connectors for solder pins and get adicional 3.3V, 5V, GND, SCL, SDA, RX and TX.

Picoino Uno R3 Smd, Arduino Compatible, with Ch340g Improved Ftdi Chip
Comes with USB cable, desktop bumper/mounting board, link to our website with applications, manuals, drivers. Works on Win/Mac/Linux
ATmega328P microcontroller
14 Digital I/O Pins (6 PWM outputs) + 6 Analog Inputs
16Mhz Clock Speed, 32k Flash Memory

Microcontroller
ATmega328
Operating Voltage 5V
Input Voltage (recommended) 7-12V
DC Current for 3.3V Pin 150 mA
Input Voltage (limits) 6-20V
Analog Input Pins 6
Digital I/O Pins 14 (of which 6 provide PWM output)
DC Current per I/O Pin 40 mA
Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
1 KB (ATmega328)
2 KB (ATmega328) EEPROM
Clock Speed 16 MHz

The post Arduino Uno R3 SMD Micro controller appeared first on Shopikbuzz.

]]> https://shopikbuzz.pk/product/arduino-uno-r3-smd/feed/ 0