The post Drone Propeller Blade CW/CCW 10″ X 4.5″ appeared first on Shopikbuzz.

• BEC Power: Yes
• Cut Off Voltage: 4V
• BEC: Yes
• BEC Power: 1.5A/5V
• Reset: Throttle Lowest Con.
• Current: 30A
• Battery Range: 5-10 Cells
• Specification:
• Size: 57mm x 25mm x 8mm
• Net weight: 108g
• Package weight: 118g
• Color: Yellow

• 30A: an instant 45 A, 40A continuous 10 seconds
• Size: 30A-45 X 24 X 8mm
• voltage range: 4 V-16V
• battery number :4-12 NIMH 2-3LIPO (4LIPO BEC does not allow the use of output)
• BEC output: 30A, stressed: 5 V 3A. 2LIPO 4-5 micro-steering gear 3 LIPO 3-4 micro-steering gear /
• Protection features: automatic selection 2-3 LIPO were protected voltage is 6 V/9V; automatically elected NIMH, each protected voltage is 0.8 V;
• protection, without Signal one second after the shutdown.
• the use of speed control curve. Automatically adapt to the accelerator, more suitable for remote control devices.
• The use of BEC, MCU separate power supply, a more stable work.

Standard 30A BLDC ESC Electronic Speed Controller with Connector is specifically made for quadcopters and multi-rotors and provides faster and better motor speed control giving better flight performance compared to other available ESCs.

STANDARD 30A ESC Electronic Speed Controller can drive motors which consume up to 30A current. It works on 2S-3S LiPo batteries. The onboard BEC which provides regulated 5V(2A max draw) to power the flight controller and other onboard modules. It can be used to control our brushless motors with a 2S-3S LiPo (make sure motor doesn’t draw more than 30A).

This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv, 2200kv). for more motor

The post ESC Electronic Speed Control 30A Drone appeared first on Shopikbuzz.

Features:

Built from quality glass fiber and polyamide nylon.

Integrated PCB connections for direct soldering of your ESCs

Pre-threaded brass sleeves for all of the frame bolts.

Colored arms for orientation to keep you flying in the right direction.

Large mounting tabs on main frame bottom plate for easy camera mounting.

Easy assembly.

Specification:

Width: 450mm

Height: 55mm

Weight: 280g (w/out electronics)

Motor Mount Bolt Holes: 16/19mm

G.Weight: 395g

Wheelbase: 17.7in/450mm

Net weight: 272g

100% Brand new

Made by advanced engineering material,superstrong &smooth Kit

Recommended uses(Not Included):

A2208/A2212 800KV~1100kv brushless motor

ESC 15~25A

1800mAh~3600mAh 3S LiPo battery

1045/8045 Forward&Reverse propeller

Package:

1 X F450 Drone Frame Kit

1 set X f450 Landing Gear Skids
★Ultra high strength material:Built from quality glass fiber and polyamide nylon.It is resistant to falling and impact.
★Integrated PCB connections for direct soldering of your ESCs, make your esc,power supply and other wiring more quickly and safely.
★Pre-threaded brass sleeves for all of the frame bolts.Colored arms for orientation to keep you flying in the right direction.
★Large mounting tabs on main frame bottom plate for easy camera mounting. Easy assembly.
★★Instructional video：https://www.youtube.com/watch?v=zgKRQ-jxSUE

The post Drone Frame F450 Quadcopter kit 4-Axis appeared first on Shopikbuzz.

Features : 

1. Super active and passive anti-jamming capabilities.
2. Very low power consumption.
3. High receiving sensitivity.
4. 8 model memory, digital control.
5. Can be programmed by PC with included software.
6. Full range 2.4GHz 6-channel radio.
7. 4-Model
8. 4 Types (Airplane, Heli90, Heli120, Heli140).
9. Integrated
10. Contrast Adjustment.
11. Throttle cut.
12. Computer
13. USB Socket.
14. Use a linear spread of fine paragraph by excess antenna.
15. It covers the entire band width of he antenna bandwidth range.
16. High quality and stability.

Package Includes :

1 x FS-CT6B Drone Transmitter & Receiver

1 x USB Interface Cable

1 x Software CD

1 x Receiver Binding Cable

1 x User Manual

The post Drone Transmitter & Receiver FlySky FSCT6B 2.4GHz 6CH appeared first on Shopikbuzz.

Features:

– Arduino Compatible!
– Can be ordered with top entry pins for attaching connectors vertically, or as side entry pins to slide your connectors in to either end horizontally
– Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer
– Onboard 4 MegaByte Dataflash chip for automatic datalogging
– Optional off-board GPS, LEA-6H module with Compass.
– One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
– Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
– Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively.

Size: 70*45*13.5
Weight: 28G

Drone Flight Controller

Details:

1. data transmission port
2. analog sensor port
3. autostability gimbal output
4. ATMEGA2560 SPI online programming port (be useful for optical flow sensor)
5. USB port
6. remote control input
7. function selection jumper
8. GPS port
9. 12C external compass port
10. ATMEGA32U2 SPI online programming port
11. multifunction configurable MUX port (OSD is the defaulted output)
12. current voltage port
13. ESC power supply selection jumper
14. ESC output port

The post Drone Flight Controller APM 2.8 RC Multicopter appeared first on Shopikbuzz.