- 100% brand new and high quality
- High quality, easy to install.
- It is a good helper for your airplane or helicopter.
- Type: Outrunner Motor
- Model: A2212
- KV: 1000
- Max Efficiency: 80%
- Max Efficiency Current: 4-10A (>75%)
- Current Capacity: 12A/ 60s
- No Load Current: 10V/0.5A
- Number of Cells: 2-3 Li-Poly
- Motor Size: 27.5x38mm/1.08''x1.5''
- Shaft Diameter: 3.17mm/0.12''
- For Vehicle Type: for Airplane, Helicopter
- Package Include:
- 1 X A2212 1000kv Brushless Motor
- 1 X Bag of Fitting
-
Sale!
-
Sale!
- 5-15V voltage input, 1.25V 1.5V 1.8V 2.5V 3.3V 5V output, 3A current output, short-circuit point to
- adjust the output voltage (to avoid the appearance of the same potentiometer adjustable voltage
- appears not allowed to phenomenon), the default output voltage1.25V.Suitable for a variety of
- small-signal LCD TV power supply maintenance replacement, three lines get power maintenance.
-
Sale!
- Imported Best Quality.
- 100 Piece Bag Pack.
- 100x1.8mm and 150x2.5mm dimensions available , depend upon customer's selection
- Slip Proof Lock.
- Crystal Clear White Color.
A cable tie (also known as a hose tie, zap strap or zip tie, and by the brand names Ty-Rap and Panduit strap) is a type of fastener, for holding items together, primarily electric cables or wires. Because of their low cost and ease of use, cable ties are ubiquitous, finding use in a wide range of other applications. Stainless steel versions, either naked or coated with a rugged plastic, cater for exterior applications and hazardous environments.
The common cable tie, normally made of nylon, has a flexible tape section with teeth that engage with a pawl in the head to form a ratchet so that as the free end of the tape section is pulled the cable tie tightens and does not come undone. Some ties include a tab that can be depressed to release the ratchet so that the tie can be loosened or removed, and possibly reused.
v
-
Sale!
- Imported Best Quality.
- 100 Piece Bag Pack.
- 100x1.8mm and 150x2.5mm dimensions available , depend upon customer's selection
- Slip Proof Lock.
- Crystal Clear White Color.
A cable tie (also known as a hose tie, zap strap or zip tie, and by the brand names Ty-Rap and Panduit strap) is a type of fastener, for holding items together, primarily electric cables or wires. Because of their low cost and ease of use, cable ties are ubiquitous, finding use in a wide range of other applications. Stainless steel versions, either naked or coated with a rugged plastic, cater for exterior applications and hazardous environments.
The common cable tie, normally made of nylon, has a flexible tape section with teeth that engage with a pawl in the head to form a ratchet so that as the free end of the tape section is pulled the cable tie tightens and does not come undone. Some ties include a tab that can be depressed to release the ratchet so that the tie can be loosened or removed, and possibly reused.
v
-
Sale!Out of stock
- 2 Independent Charging Channels
- Timer Control (2 pairs: 6 hours, 1 pair: 3 hours)
- Beeps when charge complete
- Low Battery Leakage Current Holds Charge Longer
- AA/AAA Reverse Polarity Protection
- Over Temperature Protection
- LED Indicators
- Input Voltage:
- AC 100-240V ~ 50/60Hz 5W max
Output:
- DC 1x(2.8V 800mA) 1 Pair AA
- DC 2x(2.8V 400mA) 2 Pairs AA
- DC 1x(2.8V 400mA) 1 Pair AAA
- DC 2x(2.8V 200mA) 2 Pairs AAA
- Charger Detail:
- Charges Battery Type:
- Ni-MH
- Ni-Cd
- Battery Size / Slots No
- 1-2x AA
- Charging Channels
- 2 Channels
- Plug In
- Wall Plug In
-
Sale!Out of stock
- Canon Branded Retail Package
- Nickel Metal-Hydride technology free of memory effect
- Compatible with any digital camera that uses AA batteries
- 2500 mAh capacity rating
- Can be recharged approximately 300 times
-
Sale!
- Reverse Batter Protection
- Charger Current: 10A
- Battery Voltage: 12V DC
- Input Voltage: 230V AC
- Rated Frequency: 47-63Hz
- Cooling Fan
- Analog Display for Current Flow
- Automatic Charger
- Constant-Current Charging- Increase Charging Speed
- Constant-Voltage Charging- Eliminate Overcharge, Increase life of battery
- Floating Charging mode- Trickle maintenance, Keep Full
- Type:AC/DC converters
-
Sale!
Car Bluetooth- Pairing timeout shutdown: shutdown after 5 minutes of pairing status.
- Low voltage reminder: when the voltage is less than 3.2v, it is reminded every 5 seconds, and 3.1v is off.
- System Status:
- Power off: MFB long press for 3 seconds
- Volume up: short press VOL+
- Volume reduction: press VOL-
- Switching languages: double-click and hold MFB in the pairing state (red and blue lights flashing)
- Music Control:
- Play pause: press MFB
- Last song: VOL- press for 2 seconds
- Next song: VOL+ 2 seconds
- Telephone Control:
- Answer the phone: press MFB when calling
- Reject the call: the duration of the call is MFB
- Unsigned redial: double-click the MFB key, then press MFB to cancel the dialing
- Led Display:
- Power-on pairing: red and blue lights flashing alternately
- Connection status: blue light flashes slowly (5 seconds 1 time)
- Low voltage: red light flashing (0.5 SEC 1)
- Working Current:
- Status parameter (4.v) (3.4v)
- Rated operating voltage 4V 3.4V
- Matching state current 4.33 ma-20.56 mA 4.47 ma-22.03 mA
- Standby current (bluetooth connected) 0.43 ma-8.31 mA 0.41 ma-8.74 mA
- Play music current 19.04 ma-23.21 mA 22.85 ma-23.74 mA
- The call current is 23.82 ma-24.05 mA 25.19 ma-25.78 mA
- Charging current 100.0mA. 100.0mA
- Power off current 1.4uA 1.1uA
- Shopikbuzz
Mini Portable 3.5mm Bluetooth Auto Audio Receiver Stereo Bluetooth AUX Converter RCA USB For TV PC Car Kit Wireless Adapter Description: Speaker Bluetooth receiver is a high cost-effective Bluetooth stereo receiver, which supports digital products with Bluetooth functions such as iphone, ipad, Android mobile phone, computer and so on, to achieve wireless transmission of stereo. Features: 1. Wired wireless, converting normal speakers into wireless Bluetooth speakers. 2. It can be paired with Bluetooth phone, IPAD and Bluetooth computer to realize speaker wireless. 3. Listen to music, watch movies and play games to enjoy the shock effect. 4, Mini portable, easy to use. Specification: Item Name: 3.5mm Bluetooth Auto Audio Receiver Bluetooth: v2.0 + ed specification Output Interface: 3.5mm audio jack Receiving Distance: barrier free 10m Power Supply Mode: USB Voice Output Sampling Rate: 44.1KHZ and 48KHZ Product Function: Convert Bluetooth signal to 3.5mm headphone jack output audio signal. Product Size: 41 x 21 x 10mm / 1.61 x 0.83 x 0.39 inch Item Weight: 5.9g Package Contents: 1 x 3.5mm audio receiver 1 x 3.5mm audio data line Connection Instructions: 1. The first way, the speaker has no USB interface. Insert the Bluetooth U disk into a charger with 5VUSB interface, then connect the audio cable to the AUX port. 2. The second way, the speaker has USB interface. Insert the Bluetooth U disk directly into the speaker USB interface, then connect the audio cable to the AUX port. Two pairing: 1. Turn on the Bluetooth function of the mobile phone (or computer), search the peripheral Bluetooth devices, find a device named PT-810 in the search results, and then pair it with the password of 0000. 2. Play the music in the phone after the pairing is successful, and then choose the music in the sub-menu to play through Bluetooth. The wonderful music is played out from the speaker!
Product type: Audio Adapters
-
Sale!
- Bluetooth V3.0+EDR music receiver, transmission range up to 10m / 33ft.
- Support iPhone, Android phone, other smart phones which with Bluetooth function.
- Support hands free, can connect microphone and support phone calling through Bluetooth receiver.
- Sleep mode for saving power.
- 3.5mm stereo audio output.
- Compatible with home stereos / speaker, car stereos, headphones.
-
Sale!
Rated spec:- Input voltage: 12V DC , 220v AC
- Power: 45W
- Current limit protection: 3.8A
- Over current protection: 6A
- Phase failure protection: Yes
- Remote Controlled
- 1x Circuit
- 1x IR Remote
- 2x Connection Clip wire
